Phosphat reduct from Amtra is a synthetic resin for phosphate (PO₄) reduction in freshwater and marine aquariums.

Features

Phosphat reduct from Amtra is a synthetic resin for phosphate (PO₄) reduction in freshwater aquariums or in marine aquarium.

Phosphat reduct makes it possible to lower the phosphate (PO₄) value in freshwater and marine aquariums, avoiding tedious water changes.

Amtra's Phosphat reduct effectively counteracts algae growth as it removes excess phosphate (PO₄) from the water. With PO₄ values above 3 mg/l in fresh water or 0.05 mg/l in salt water, adverse effects on fish and plants and invertebrates can occur, and algae growth is very likely. It is recommended that Nitrate (NO₃) value should also be monitored at all times and in case to intervene with phosphate resins such as Amtra nitrat reduct.

Amtra's Phosphat reduct is used directly inside the aquarium filter or in a fluidized bed filter. Before placement in the aquarium rinse abundantly with phosphate-free water such as water treated with reverse osmosis, do not use tap water as it may contain phosphates that would be adsorbed by the resin and reduce its effect once placed in the aquarium.

Doses

Use 250 ml of Amtra's Phosphat reduct to treat 600 liters of fresh water or 300 liters of salt water. Place Amtra's Phosphat reduct inside a filter or directly into the aquarium in an area with a strong water current. Continue to monitor the Phosphate level with the appropriate tests. If rising values are revealed, replace the resin totally.

Phosphat reduct from Amtra is available in a 500-mL package. Phosphat reduct is divided into 2 nets of 250 ml each for about 250 liters.